View CSLO-N34SSB1-QA0R_4451168.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LL-N34SSB1-QA0R A Rev.
PRODUCT SPECIFICATION
Model NoCSLO-N34SSB1-QA0R
LED Type : Superbright Lamp LED Package : Oval LED Lamp Emitting Color Blue Viewing Angle 110 /40 Stopper
CUSTOMER APPROVED SIGNATURES
APPROVED BY
CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377

Descriptions:

CHECKED BY
PREPARED BY
OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112
http://www.csctw.com.tw
CHINA SEMICONDUCTOR CORPORATION Model NoCSLO-N34SSB1-QA0R Features 1. Low Power Consumption. 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Rohs Compliant
Spec. No. PS-LL-N34SSB1-QA0R A Rev.
Device Selection Guide Chip
CSLO-N34SSB1-QA0R
Package Outline Dimensions -
Tolerance

Part No.
Material InGaN Emitted Color Blue
LED Lens
Blue Diffused
0.01 0.25 Unit
inch mm
http://www.csctw.com.tw
Page
1/6
CHINA SEMICONDUCTOR CORPORATION
Spec. No. PS-LL-N34SSB1-QA0R A Rev.
Model NoCSLO-N34SSB1-QA0R Absolute Maximum Rating (Ta=25) Parameter
Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Storage Temp. Lead Soldering Temperature
Tstg Tsol
1/10
-40 ~ +100
Max. 260 for 5 sec Max. (3mm from the epoxy bulb)
Electro-optical Characteristics -
Parameter
Forward Voltage Luminous Intensity Dominant Wavelength Peak Wavelength Spectral Half Width
Symbol VF IV d p 1/2
Viewing Angle
2 1/2
http://www.csctw.com.tw
Reverse Current
IR

* Pulse width
0.1 msec. duty
Min. ----400 460 ---------------------
Typ. 3.2 600 470 465 20 110(X) 40(Y) -----
Max. 3.8 1150 480 -------------
Unit V mcd nm nm nm
deg ----50 A VR=5V

Symbol Pd IF IFP VR Topr
Rating 114 30 100 5 -30 ~ +85
Unit mW mA mA V
(Ta=25)
Condition
IF=20mA
Page
2/6
CHINA SEMICONDUCTOR CORPORATION Model NoCSLO-N34SSB1-QA0R Luminous Intensity Rank Limits ( IF = 20mA ) unitmcd
Part No. CSLO-N34SSB1-QA0R Code min. max.
Spec. No. PS-LL-N34SSB1-QA0R A Rev.
Color Rank Limits ( IF = 20mA )
Notes: 1. Tolerance of measurement of luminous intensity 2. Tolerance of measurement of Color Coordinates 3. Tolerance of measurement of forward voltage 4. All data are measured by CSC's test equipment. 5. One delivery will include several color rank, VF rank and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by CSC. 7. Please confirm with CSC salesman,if your request different form standard specification. :15 :0.01 :0.05v

L M N P
400 520 680 880
520 680 880 1150
unitnm
Part No. CSLO-N34SSB1-QA0R Code min. min.
1 2 3 4
460 465 470 475
465 470 475 480
http://www.csctw.com.tw
Page
3/6
CHINA SEMICONDUCTOR CORPORATION Model NoCSLO-N34SSB1-QA0R Typical Electrical / Optical Charateristics Curves (Ta = 25 Unless Otherwise Noted)
Forward Current vs.Forward Voltage
30
IF - Forward Current - mA
TA=25 C
Spec. No. PS-LL-N34SSB1-QA0R Rev. A
Relative Intensity (Normalized at 20mA)
Forward Current vs.Ambient Temperature
40
IF - Forward Current - mA
30
Relative Intensity

Relative Intensity vs.Forward Current
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30
DC Forward Current - mA
TA=25 C
25 20 15 10 5 0 0
1.0
2.0
3.0
4.0
VF - Forward Voltage - V
Relative Intensity vs.Wavelength
1.2 1.0 0.8 0.6 0.4 0.2
TA=25 C IF=20mA
20
10
0 0 20 40 60 80 100
TA - Ambient Temperature -C
0 350 400 450 500 550 600 650
Wavelength - nm
100%
0
10
H-H 20 30 40 50 V-V
50%
60 70 80
0% 90
90 60 30 0% 50% 100%
Relative Luminous Intensity vs.Radiation Angle
http://www.csctw.com.tw
Page
4/6
CHINA SEMICONDUCTOR CORPORATION Model NoCSLO-N34SSB1-QA0R
Spec. No. PS-LL-N34SSB1-QA0R Rev. A

http://www.csctw.com.tw
Page
5/6
CHINA SEMICONDUCTOR CORPORATION Model NoCSLO-N34SSB1-QA0R Precautions For Use 1. Recommended Soldering conditions Wave Soldering
Spec. No. PS-LL-N34SSB1-QA0R Rev. A
Temperature(C)
2. Soldering Iron be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W , and temperature should be controllable. Surface temperature of the device should be under 230. 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs.
Note: The specifications are subject to change without notice. Please contact us for updated information.

260(max.) 250 240 Preheat 105(max.)
0
Max. 60sec. Time(sec.)
5 sec.
Basic SPEC. is
5sec. When 260. If temperature is higher, time should
http://www.csctw.com.tw
Page
6/6

▲Up To Search▲

Price & Availability of CSLO-N34SSB1-QA0R

	To Download CSLO-N34SSB1-QA0R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .